Contact Us
×
How you can contact us:

  • Technical Assistance

    Request product support from SAP

  • Non-Technical Assistance

    Request non-product support or provide feedback on SAP Support Portal site

SAP NetWeaver Application Server for ABAP (higher than 7.40)

Available Monitoring Content

The following monitoring content is available for SAP NetWeaver Application Server for ABAP (higher than 7.40):

CategoryTypeDescription
IDocMessagesIDocs sent or received by the SAP S/4HANA system
Web Service MessagesMessagesMessages sent or received via Web Services and Web Service Proxies
ABAP RuntimeExceptionsABAP runtime errors (available with ST-PI 7.40 SP16)
ABAP UpdateExceptionsABAP update errors (available with ST-PI 7.40 SP16)
ABAP Gateway ErrorsExceptionsExceptions in the ABAP Gateway (available with ST-PI 7.40 SP16)
ABAP Aborted JobExceptionsABAP aborted jobs (available with ST-PI 7.40 SP16)
ABAP System LogExceptionsABAP system log errors (available with ST-PI 7.40 SP16)
ABAP Web Service ConsumerExceptionsWeb service errors for outgoing web service calls (available with ST-PI 7.40 SP16)
ABAP Web Service ProviderExceptionsWeb service errors for incoming web service calls (available with ST-PI 7.40 SP16)

Connect SAP ABAP On-Premise System

To perform the necessary setup steps in the SAP NetWeaver Application Server for ABAP system, please refer to:

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP NetWeaver Application Server for ABAP.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Message(IDOC) Detected(Single): The event is created for each failed IDoc.
  • Erroneous Messages(IDOC) Detected(Grouped): The event is created if one or more IDocs failed since the last data collection.

Available Filters

Filters for Data CollectionFilters for Events
  • Basic Type
  • Direction
  • Message Function
  • Message Type
  • Message Variant
  • Receiver Address
  • Receiver Partner Function
  • Receiver Partner Number
  • Receiver Partner Type
  • Receiver Port
  • Sender Address
  • Sender Partner Function
  • Sender Partner Number
  • Sender Partner Type
  • Sender Port
  • Status
  • Status Group
  • Status Text
 
  • Message Type
  • Status
  • Status Group

Setup Collection for Additional Payload Attributes

You can collect payload data from IDocs. This data will be available in the message details on the tab "Message Data".

  1. To find the segment field name:
    1. Log on to the managed ABAP backend system
    2. Go to transaction WE05
    3. Enter the search parameters to find one IDoc message for the IDocs you are interested in
    4. Double-click on the IDoc to open it
    5. Expand 'Data Records'
    6. Select the segment that you are interested in
    7. You find the segment fields on the screen "Content of Selected Segment"
  2. To set up the data collection of payload attributes click on the > button at the end of the line for the category IDoc
  3. In the area "Collect Additional Attributes"    
    1. Click the "Add" button to add the payload attribute
    2. Enter the filter value:
      1. Message Type
      2. Segment Name
      3. Field Name
    3. Click "OK"
  4. Click the "Save" button

You can search for the messages that contain the collected data in the Tracking application. Please enclose the value with '*' to successfully find the messages (e.g. *00123456*).

Prerequisites

  • The Minimum System Requirements to monitor SXMB_MONI for Web Services is SAP BASIS 7.02 SP08
Available Events
  • Erroneous Message(WS) Detected(Single): The event is created for each failed web service message.
  • Erroneous Messages(WS) Detected(Grouped): The event is created if one or more web service messages failed since the last data collection.

Available Filters

Filters for Data CollectionFilters for Events
  • Adapter Type
  • Direction
  • Message State
  • Processing Status Group
  • Processing Status Group Text
  • Receiver Interface Name
  • Receiver Interface Namespace
  • Receiver Interface Operation
  • Receiver Party
  • Sender Interface Name
  • Sender Interface Namespace
  • Sender Interface Operation
  • Sender Party
  • Status
  • Status Group
  • Status Text
  • Status
  • Status Group

Setup Collection for Additional Payload Attributes

You can collect payload data from Web Service messages. This data will be available in the message details on the tab "Message Data".

  1. Find the payload attribute name:
    1. Log on to the managed ABAP backend system
    2. Go to transaction SRT_MONI
    3. Enter the search parameters to find one web service message for the web service you are interested in
    4. Double-click on the web service message to open it
    5. Select 'Message Body'
    6. Click the button 'Original XML' to open the formatted XML message
    7. Find the attribute you are interested in
    8. Note down the XML tag name
  2. To set up the data collection of payload attributes click on the > button at the end of the line for the category "Web Service Messages"
  3. In the area "Collect Additional Attributes"    
    1. Click the "Add" button to add the payload attribute
    2. Enter the filter value:
      1. Attribute: The XML tag name on the attribute
    3. Click "OK"
  4. Click the "Save" button

You can search for the messages that contain the collected data in the Tracking application. Please enclose the value with '*' to successfully find the messages (e.g. *00123456*).

Prerequisites

  • The Minimum System Requirement to monitor PI Messages is ST-PI 7.40 SP20
Available Events
  • Erroneous PI Messages Detected (Single): The event is created for each failed PI message.
  • Erroneous PI Messages Detected (Grouped): The event is created if one or more PI messages failed since the last data collection.

Available Filters

Filters for Data CollectionFilters for Events
  • Adapter Type
  • Direction
  • Message State
  • Processing Status Group
  • Processing Status Group Text
  • Receiver Interface Name
  • Receiver Interface Namespace
  • Receiver Interface Operation
  • Receiver Party
  • Sender Interface Name
  • Sender Interface Namespace
  • Sender Interface Operation
  • Sender Party
  • Status
  • Status Group
  • Status Text
  • Status
  • Status Group

Setup Collection for Additional Payload Attributes

You can collect payload data from PI Messages. To collect data you need to define User Defined Search (UDS) attributes in SAP Process Integration. This data will be available in the message details on the tab "Message Data".

  1. To set up the data collection of payload attributes click on the > button at the end of the line for the category "PI Messages"
  2. In the area "Collect Additional Attributes"    
    1. Click the "Add" button to add the payload attribute
    2. Enter the filter value:
      1. Attribute: The name of the UDS attribute
    3. Click "OK"
  3. Click the "Save" button

The setup of the User-Defined Message Search is performed in the SAP PI system. You can define UDS attributes in the Advanced Adapter Engine, as well as in the Integration Engine.

For more information please refer to the SAP Help Portal:

Setup Collection of Passport Information for PI Messages

With a prerequisite of at least ST-PI SP22 we have enabled the collection of passport information for PI message for ABAP systems in Integration Monitoring. This requires some additional steps to be done in the ABAP system:

  1. Install the collective SAP Note 2645656 - XI runtime: Passport property enhancement of XI log
  2. Follow the manual steps described in the solution section of the note.
    1. You have to activate the forwarding of the SAP Passport in every system and client that you use in your scenario.
    2. Transaction SXMB_ADMIN → "Configuration">"Integration Engine Configuration" → "Specific Configuration"
    3. Category "RUNTIME"
      Parameter "PASSPORT"
      Subparameter ""
      Value "0" / "1" (default "0", SAP Passport is not saved or transferred)

Available Events
  • Erroneous ABAP Aborted Job: The event is created for aborted ABAP jobs.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • Job Name
  • User

Coming soon.

Available Events
  • Erroneous ABAP Gateway Errors: The event is created for ABAP gateway exceptions.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • Service Name
  • User
  • Host
  • Message
  • Location
  • Message Id

Coming soon.

Available Events
  • Erroneous ABAP Runtime: The event is created for ABAP runtime errors.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • Runtime Error~Exception
  • Program
  • User
  • Message

Coming soon.

Available Events
  • Erroneous ABAP System Log: The event is created for exceptions in the ABAP System Log.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • Message Id
  • Program
  • User
  • Status

Coming soon.

Available Events
  • Erroneous ABAP Update: The event is created for ABAP Update errors.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • User
  • Transaction

Coming soon.

Available Events
  • Erroneous ABAP Web Service Consumer: The event is created for errors in the web service log for ABAP Web Service Consumers.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • Message
  • Proxy Name
  • User

Coming soon.

Available Events
  • Erroneous ABAP Web Service Provider: The event is created for errors in the web service log for ABAP Web Service Providers.

Available Filters

Filters for Data CollectionFilters for Events (planned)
  • Message
  • WS Name (Proxy)
  • User

Coming soon.