SAP Engineering Control Center interface to NX
General Information
This product helps customers to integrate NX into SAP PLM. The interface allows to store CAD files in SAP’s Document Info Record and document structures. The product provides additional menu entries in the CAD system and connects the CAD system with SAP Engineering Control Center.
Preconditions
SAP Engineering Control Center needs to be installed and configured. Please refer also corresponding documentation and installation guides for SAP Engineering Control Center.
Procedure
Please download the software to your local client, start the installer and follow the instructions.
Relevant SAP Notes
The release information for 5.1 can be found in SAP Note 2233704(opens in new tab)
The release information for 5.2 can be found in SAP Note 2806807(opens in new tab)
Documentation
The documentation for 5.1 is available here(opens in new tab).
The documentation for 5.2 is available here(opens in new tab).
Product Availability Matrix (PAM)
Starting with support for the Siemens NX 1926 Series in September 2020, the release strategy for SAP ECTR interface to NX will change.
In order to best support the semi-annual release cycle of Siemens NX, the release strategy of SAP ECTR interface to NX is now based on this cycle.
To clarify this change, the Feature Package number in the version jumps to "100".
Detailed information about these changes in the release strategy can be found in this FAQ article in the SAP Community Wiki(opens in new tab).
| Supported Siemens NX or NX X*** version / Siemens NX series | Version of SAP ECTR interface to NX | Compatibility with SAP ECTR / SAP ECTR for SAP S/4HANA | OS | ||||
|---|---|---|---|---|---|---|---|
5.1 | 5.2 | 1.1 | 1.2 | 1.3 | |||
|
|
|
|
|
| ||
NX12, | 5.1.15.0 5.2.0.0 | 5.1.15.0 | 5.2.0.0 | 1.1.0.0 | - | - | Windows 7/8/10 |
NX12, | 5.1.15.1 5.2.1.0 | 5.1.15.0 | 5.2.1.0 | 1.1.1.0 | - | - | Windows 7/8/10 |
NX12, | 5.1.15.4 5.2.2.1 | 5.1.15.2 | 5.2.2.1 | 1.1.2.1 | - | - | Windows 7/8/10 |
NX12, | 5.1.100.0 5.2.100.0 | 5.1.16.x | 5.2.3.x | 1.1.3.x | - | - | Defined by SAP ECTR and Siemens NX |
NX12, | 5.1.110.0 5.2.110.0 | 5.1.16.x | 5.2.3.x | 1.1.3.x | - | - | Defined by SAP ECTR and Siemens NX |
NX12, | 5.1.120.0 5.2.120.0 | 5.1.16.x | 5.2.3.x | 1.1.3.x | - | - | Defined by SAP ECTR and Siemens NX |
NX12, | 5.2.130.0 | -** | 5.2.3.x | 1.1.3.x | - | - | Defined by SAP ECTR and Siemens NX |
NX12, | 5.2.140.0 | -** | 5.2.3.x | 1.1.3.x | - | - | Defined by SAP ECTR and Siemens NX |
NX12, | 5.2.150.0 | -** | 5.2.3.x | 1.1.3.x | - | - | Defined by SAP ECTR and Siemens NX |
| NX1872 - NX2306 | 5.2.160.0 | -** | 5.2.3.x and higher | 1.1.3.x and higher | 1.2.0.x and higher | - | Defined by SAP ECTR and Siemens NX |
| NX1899 - NX2312 | 5.2.170.0 | -** | 5.2.3.x | 1.1.3.x | 1.2.0.x and higher | - | defined by SAP ECTR and Siemens NX |
NX1926 - NX2406 |
5.2.180.0
| -** | 5.2.3.x | 1.1.3.x | 1.2.0.x and higher | - | Defined by SAP ECTR and Siemens NX |
NX1953 - NX2412 | 5.2.190.0 | -** | 5.2.3.x and higher | 1.1.3.x and higher | 1.2.0.x and higher | - | Defined by SAP ECTR and Siemens NX |
| NX1980 - NX2506 | 5.2.200.0 | -** | 5.2.3.x and higher | 1.1.3.x | 1.2.0.x and higher | 1.3.0.x | defined by SAP ECTR and Siemens NX |
NX2007 - NX2512 | 5.2.210.0 | -** | 5.2.3.x | | 1.2.0.x | 1.3.0.x and higher | defined by SAP ECTR and Siemens NX |
| NX2206 - NX2606* | 5.2.220.0 planned for Aug. 2026* | -** | 5.2.3.x* and higher | -** | 1.2.0.x* and higher | 1.3.0.x* and higher | defined by SAP ECTR and Siemens NX* |
* planned
** Due to the end of maintenance for the specific SAP ECTR versions, these are the last supported Versions of SAP ECTR interfaces to NX:
- SAP ECTR 5.1 (December 31, 2021) --> 5.1.121.0
- SAP ECTR for SAP S/4HANA 1.1 (December 31, 2025) --> 5.2.200.0
*** "NX X Essential" is not supported
Maintenance Strategy
SAP plans to ship releases on a yearly basis. Additionally we plan to deliver Feature Packages on a regular basis.
SAP recommends always installing the latest Patches, Support Packages and Feature Packages.
Patches and Support Packages will contain corrections; Feature Packages will contain new functionality. SAP plans to deliver a new feature package for the CAD interface within 8 weeks after a new CAD release is available for customers.
Support
In case you encounter problems when installing, upgrading or running SAP Engineering Control Center interface to NX, create a case using component PLM-ECC-NX.
Additional Information
Additional information about licensing can be found in SAP Note 2096135(opens in new tab) and 2089533(opens in new tab).
To request a license please create a case using component = PLM-ECC-NX with the following information:
- Topic: SAP ECTR Interface to NX: License request
- Your company name
- The installation number of the used SAP system
- If you need a time limited Test License or a Production License
- An email contact