SAP S/4HANA Cloud

This page describes the monitoring categories for SAP S/4HANA Cloud with SAP Focused Run 3.0 FP 02 or newer.

If you have an older SAP Focused Run release please refer to the respective documentation below.

SAP Focused Run ReleaseMonitoring Setup Documentation
SAP Focused Run 3.0 FP02Stay on this page
SAP Focused Run 3.0 FP01 and lowerSAP S/4HANA Cloud - up to SAP Focused Run 3.0 FP01

Technical Prerequisites

The following technical prerequisites have to be met in order to monitor this scenario:

  • SAP Focused Run 3.0 FP 2.0

Connect SAP S/4HANA Cloud

Perform the step described on the page below to connect SAP S/4HANA Cloud to SAP Focused Run:

Advanced Integration Monitoring Setup

For SAP S/4HANA Cloud services with PUSH monitoring configuration, the monitoring is activated by default during the PUSH monitoring activation in the managed system. You can activate or deactivate the categories after the initial setup.

Available Monitoring Categories

For SAP S/4HANA Cloud, different monitoring categories are available:

  • SAP S/4HANA Cloud Asset Central Foundation Integration: Collects exceptions happening in SAP Intelligent Asset Management
  • SAP S/4HANA Cloud Data Replication (f.k.a. SAP S/4HANA Cloud): Collects exceptions in the Data Replication Framework (DRF)
  • Extensibility Transport Management: Collects exceptions in the Extensibility Transport Management
  • bgRFC(queue): Collects connections from AIF (Application Interface Framework) of type queued bgRFC
  • bgRFC(trans): Collects connections from AIF (Application Interface Framework) of type transactional bgRFC
  • IDoc: Collects messages from AIF (Application Interface Framework) of type IDoc
  • PI-runtime: Collects messages from AIF (Application Interface Framework) of type PI 
  • qRFC: Collects connections from AIF (Application Interface Framework) of type qRFC
  • tRFC: Collects connections from AIF (Application Interface Framework) of type tRFC
  • WS-runtime: Collects messages from AIF (Application Interface Framework) of type web service 
  • Synchronous Log: Collects messages from AIF (Application Interface Framework) of type SYNC-LOG
  • XML: Collects messages from AIF (Application Interface Framework) of type XML
 
 

For SAP S/4HANA Cloud services using PUSH monitoring, standard filters are created during the initial PUSH monitoring setup. You can create additional filters or change the existing filter as required. 

Available Filter Options

For categories collecting messages from AIF no data collection filters are allowed. In general all data is collected. You can create a filter later on, when creating an alert. 

The other categories you can restrict by the following parameters:

The category 'SAP S/4HANA Cloud Asset Central Foundation Integration' is based on ABAP Application Log

  • Object (mandatory): The object of the log record (always /SYCLO/)
  • Subobject (mandatory): The sub-object of the log record (always /SYCLO/INB_TRANS)
  • External ID: External ID of the Application Log entry
  • Message ID: Message Class
  • Message Number: Message Number
  • Text: Message Text
  • Program: Program triggering the log entry
  • Transaction: Transaction code triggering the log entry
  • User: The user who triggered the log entry

The category 'SAP S/4HANA Cloud Data Replication' is based on ABAP Application Log

  • Object (mandatory): The object of the log record (always DRF_OUTBOUND)
  • Subobject (mandatory): The sub-object of the log record (e.g. CHANGES)
  • External ID: External ID of the Application Log entry
  • Message ID: Message Class
  • Message Number: Message Number
  • Text: Message Text
  • Program: Program triggering the log entry
  • Transaction: Transaction code triggering the log entry
  • User: The user who triggered the log entry

The category 'Extensibility Transport Management' is based on ABAP Application Log

  • Object (mandatory): The object of the log record (always ATO)
  • Subobject (mandatory): The sub-object of the log record (e.g. EXPORT)
  • External ID: External ID of the Application Log entry
  • Message ID: Message Class
  • Message Number: Message Number
  • Text: Message Text
  • Program: Program triggering the log entry
  • Transaction: Transaction code triggering the log entry
  • User: The user who triggered the log entry

For the other categories you can either select all messages or you can restrict them by the following parameters:

Available Metrics

For SAP S/4HANA Cloud the following metrics are available:

  • SAP S/4HANA Cloud Asset Central Foundation Integra exceptions: Creates an alert for each exception in the category Asset Central Foundation Integration
  • Data filter fields:
    • Object: The object of the log record, select from input help
    • Subobject: The sub-object of the log record, select from input help
    • External ID: External ID of the Application Log entry
    • Message ID: Message Class
    • Message Number: Message Number
    • Text: Message Text
    • Program: Program triggering the log entry
    • Transaction: Transaction code triggering the log entry
    • User: The user who triggered the log entry
  • SAP S/4HANA Cloud Data Replication exceptions: Creates an alert for each exception in the category Data Replication
  • Data filter fields:
    • Object: The object of the log record, select from input help
    • Subobject: The sub-object of the log record, select from input help
    • External ID: External ID of the Application Log entry
    • Message ID: Message Class
    • Message Number: Message Number
    • Text: Message Text
    • Program: Program triggering the log entry
    • Transaction: Transaction code triggering the log entry
    • User: The user who triggered the log entry
  • Extensibility Transport Management exceptions: Creates an alert for exceptions in the category Extensibility Transport Management
  • Data filter fields:
    • Object: The object of the log record
    • Subobject: The sub-object of the log record
    • External ID: External ID of the Application Log entry
    • Message ID: Message Class
    • Message Number: Message Number
    • Text: Message Text
    • Program: Program triggering the log entry
    • Transaction: Transaction code triggering the log entry
    • User: The user who triggered the log entry
  • Erroneous Messages detected: Indicates new bgRFC (queue) messages in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider bgRFC (queue) messages older than [minutes]
  • Erroneous Messages detected: Indicates new bgRFC (trans) messages in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider bgRFC (trans) messages older than [minutes]
  • Erroneous Messages detected: Indicates new IDocs in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider IDocs older than [minutes]
  • Erroneous Messages detected: Indicates new PI messages in the status Error were found during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider PI Messages older than [minutes]
  • Erroneous Messages detected: Indicates new qRFC messages in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider qRFC messages older than [minutes]
  • Erroneous Messages detected: Indicates new tRFC messages in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider tRFC messages older than [minutes]
  • Erroneous Messages detected: Indicates new Sync Log messages in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction: Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider Sync Log messages older than [minutes]
  • Erroneous Messages detected: The metric specifies the number of erroneous Web Service messages within the collection interval.
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction (if applicable): Message direction
  • Erroneous Messages detected: Indicates new XML messages in the status group ERROR were collected during the collection interval
  • Data filter fields:
    • Namespace: AIF interface namespace
    • Interface Name: AIF interface name
    • Interface Version: AIF interface version
    • Status: The last status of the message
    • Status Group: Please select a value from the input help
    • Status Text: Text in the status or parts thereof
    • Direction: Message direction
  • Metric parameters:
    • STATUS_GROUP (not changeable) = ERROR
    • OLDER_THAN_MINUTES = Only consider XML messages older than [minutes]

Additional Information

For SAP S/4HANA Cloud the following integration options are possible.The numbers refer to the table below with contains the potential monitoring categories in the involved components:

  • Integrating SAP backend with SAP S/4HANA Cloud mediated via SAP Integration Suite (Cloud Integration): 2, 5, 7
  • Integrating SAP backend with SAP S/4HANA Cloud mediated via SAP Process Integration: 1, 2, 3, 6, 7
  • Integrating SAP backend with SAP S/4HANA Cloud via SAP Cloud Connector: 1, 4, 7, 8 

 Scenario ComponentMonitored ContentMonitoring Category
Systems: ABAP on-premise systemIDocsIDoc
Systems: ABAP on-premise system Web Service errors and performance Web Service Messages (ABAP), Web Service (Performance) 
Systems: ABAP on-premise system Messages in the ABAP proxy framework ABAP: PI Messages 
Systems: ABAP on-premise system RFC destination to the S/4HANA Cloud (Cloud connector) Connection Monitoring (SM59), RFC (Performance) 
Cloud Services: SAP Integration Suite (Cloud Integration) Integration flows (IFlow) in SAP Integration Suite (Cloud Integration)SAP Integration Suite
Systems: SAP PI on-premise system PI Messages 

ABAP: PI Messages

Java: PI Communication Channels, PI Messages 

Cloud Services: SAP S/4HANA CloudExceptions and messages in SAP S/4HANA Cloud 

SAP S/4HANA Cloud Asset Central Foundation Integration, SAP S/4HANA Cloud Data Replication, Extensibility Transport Management, bgRFC(queue), bgRFC(trans), IDoc, PI-runtime, qRFC, tRFC, WS-runtime, XML, Synchronous Log

On-premise: SAP Cloud Connector Availability and Performance for SAP Cloud Connector Available monitoring content in Advanced System Monitoring